A network administrator wants to apply a critical PoE priority to any ArubaOS switch port that connects to an Aruba AP. The priority should be applied dynamically based on LLDP messages received from the AP. Which step should the administrator take to meet this goal?

A. Configure the PoE usage setting on all ports as //dp.

B. Configure the PoE usage setting on all ports as class and make sure that Aruba APs are defined as Class 4 devices.

C. Enable the default AP profile bound to the Aruba AP device type.

D. Enable LLDP IVIED TLV extensions on the switch port.

A network administrator needs to reach an ArubaOS switch CU at a management IP address The

administrator also needs to ensure that the switch entirely rejects Telnet and SSH connections from users

in data VLANs.

How can the administrator meet these goals?

A. Configure the management IP address on the default VLAN and set a manager password.

B. Configure the management IP address on a VTY interface and bind an ACL to this interface.

C. Configure the management IP address on any VLAN except the default VLAN. Set a manager and operator password .

D. Configure the management IP address on the OOBM port and configure the switch to listen for Telnet and SSH only on this port.

Refer to the exhibits.

A broadcast packet arrives tagged for VLAN 2 on the lVIember 2 link of Trk2. What does lVIember 2 do'?

A. It forwards the packet over the VSF link to Nlember 1. and then Nlember 1 forwards the packet on its link in Trk1.

B. It uses LACP to communicate with the commander on the VSF link, and then follows the commander directions.

C. It uses a hash to select one ofthe links in Trk1, and then forwards the packet locally or on the VSF link, based on the decision.

D. It forwards the packet on its local link in Trk1.

Network administrators manage ArubaOS switches through the CU. What is one prerequisite to enable transfers of completely encrypted config files?

A. Enable the include-credentials option .

B. Install a CA-signed certificate on the switch.

C. Enable TFTPS.

D. Set up SSH.

Refer to the exhibit.

What does the command output in the exhibit indicate about the status of an Aruba Virtual Switching Framework (VSF) fabric?

A. The second member of the VSF fabric has not yetjoined the fabric, so LLDP-NIAD is not operational.

B. The two members of the VSF fabric cannot contact each other, and the other member is the active member.

C. The two members of the VSF fabric are currently connected.

D. The two members of the VSF fabric cannot contact each other and this member is the active member.