An architect is helping an organization with the Physical Design of an NSX-T Data Center solution.

1.

This information was gathered during a workshop:

2.

Some workloads should be moved to a Cloud Provider.

3.

Extend network's VLAN or VNI across sites on the same broadcast domain.

4.

Enable VM mobility use cases such as migration and disaster recovery without IP address changes.

5.

Support 1500 byte MTU between sites.

Which should the architect include in their design?

A. SSL VPN

B. Reflexive NAT

C. L2 VPN

D. Load Balancer

An architect is helping an organization design an NSX-T Data Center solution. This information was gathered during a workshop:

1.

There are three LUNs In the storage array.

2.

There is no additional budget to purchase any more hardware.

3.

LUN 1 usage is 90% and is configured with a high-performance profile.

4.

LUN 2 usage is 75% and is configured with a high availability profile.

5.

LUN 3 usage is 60% and is configured with a balanced performance/availability profile.

6.

A highly available NSX Management cluster is required.

7.

ECMP routing is required.

Which should the architect recommend for the organization's NSX-T Datacenter environment?

A. Place all three NSX Managers on LUN 2 for high availability.

B. Place all three NSX Managers on LUN 1 to avoid latency.

C. Spread the NSX Managers across LUN 2 and LUN 3.

D. Spread the NSX Managers across the three LUNs.

What would an architect recommend to a customer that wants to extend management to an additional data center through Layer 2, but does not want to add additional NSX-T licensing?

A. Deploy a standalone Edge as the L2 VPN client.

B. Deploy a standalone NSX Controller.

C. Deploy a standalone NSX Manager.

D. Deploy a standalone Edge as the IPSec VPN.

An architect is helping an organization with the Logical Design of a Layer 2 bridging solution. This information was gathered during the Assessment Phase:

1.

Workloads are running on ESXI hosts.

2.

Workloads are running on KVM hosts.

3.

Workloads on both type of hypervisors should use bridging services.

4.

VLAN 50 is used for Tier-0 uplink connectivity.

Which should the architect include in their design?

A. Create an NSX Edge Bridge Cluster and configure the bridging profile with VLAN 60.

B. Create an ESXi Bridge Cluster and configure the bridging profile with VLAN 60.

C. Create an NSX Edge Bridge Cluster and configure the bridging profile with VLAN 50.

D. Create an ESXi Bridge Cluster and configure the bridging profile with VLAN 50.

An architect is designing a solution for containerization. The solution will include high availability and

security using NSX-T Data Center. The architect plans to provide a basic required components list In the

Logical Design.

Which solution should the architect recommend?

A. 2 NSX Managers, 2 virtual NSX Edges, one Tier-0 gateway, BGP configuration and a static route

B. 3 NSX Managers, 1 virtual NSX Edge, one Tier-0 gateway and a static route and OSPF

C. 1 NSX Manager, 2 virtual NSX Edges, two Tier-0 gateways In Active/Active, BGP configuration

D. 3 NSX Managers, 2 virtual NSX Edges, two Tier-0 gateways in Active/Passive, BGP configuration