A reseller would like to confirm that the chassis fans for an Intel Server Chassis are connected to the correct headers on the installed Intel Server Board. Which of the following documentation could be used to obtain this information?

A. The Quick Start Guide for the Intel Server Board shows the required connections.

B. The TPS for the Intel Server Chassis will contain details for the fans included in the specific chassis.

C. The technical specifications of the Intel Server Board will show the proper connections.

D. The TPS for the Intel Server Board will contain details for the fan headers for the specific server board.

You have spent a long time with your customer on determining the right size server for their new

operations. You now recommend that they log into Intel.com to use an online tool that will give them a lot

of this information. You advise that a good place to start is using the Intel .

Please select the correct answer below.

A. Server builder wizard

B. Configurator Wizard

C. IT Server Sizing tool

D. System Sizing configurator

An Intel Server Specialist is building a server for a customer who has specified that only Intel validated memory should be used. Where would the Specialist find a list of tested memory for currently shipping Intel Server Products? (Select ALL that apply).

A. Product Brief

B. Intel Memory Configuration Tool

C. Server Configurator Tool

D. Tested Hardware and Operating System List (THOL)

E. Price List Product Description

You are educating your customer on the benefits of server management as a way of adding value and revenue to their business. You are now discussing how accessing a customer's server remotely can save both time and money, and potentially generate an income stream for the business. You have given advice on the different tools used for getting all of the events from a managed Intel server. Are there any tools in the list below that do NOT allow the SEL to be read remotely?

A. You cannot read the SEL through the Intel Active system console

B. You cannot read the SEL through the CmdTool2

C. You cannot read the SEL through the IPMI Tool/IPMI Utility

D. You cannot read the SEL through the BMC web-GUI

Your customer has asked you the Intel Server Specialist for confirmation on the process following changes to their server (additional memory, a different raid card and a 40Gb Ethernet card)? What must they do to ensure accurate monitoring of all the sensors in their S2600WT based server?

A. The FRU/SDR must be updated with the latest master.cfg to enable the new hardware to be detected.

B. They don't need to do anything - the current firmware will auto-configure.

C. The ME must be updated prior to use of the master.cfg and then the FRUSDR update may be carried out.

D. Only the FRU needs to be updated as the SDR now auto-configures

E. Only the SDR needs to be updated as the FRU auto-configures.