Refer to the exhibit.

When planning the use of Cat7 cabling for a SmartRate connection between an ArubaOS AP and an ArubaOS switch, which sections should be considered when calculating distance?

A. A + C

B. A + B

C. A + B + C + D

D. A + B + C

A network architect has created two sites in IRIS and defined network devices for each site. From which window would a network architect connect the two sites together?

A. Topology

B. Site-1

C. Catalog

D. Start Page

A company has a warehouse that requires ruggedized APs to provide wireless access The APs need to support these characteristics: 2 or more spatial streams

802.11 ac and 802.11 n support

Cat 7 Ethernet cabling will be used to connect the APs to POE+ capable switches Link aggregation should be employed between the APs and the Ethernet switches.

Which would be the most cost- effective solution that would meet the company's requirements?

A. AP 375 with external omnidirectional antennas

B. AP 365 with integrated omnidirectional antennas

C. AP 318 with external omnidirectional antennas

D. AP 510 with external omnidirectional antennas and plastic AP cover

A network architect needs to plan a new wireless network:

A. Central only

B. Airwave and Central only

C. Airwave, Central, Windows, Mac OSX, and Linux

D. Airwave, Central, and Windows only

A network architect is designing a new wired and wireless solution for for a company. The company has two buildings on a campus, which each building has three floors. The campus core will be placed in the basement of Building 1. Each wiring closet has eight strands of multi-mode OM3 grade fiber that connect to a wiring closet of the first floor of the building it is contained, referred to as a main distribution frame (MDF). The maximum distance between a floor's wiring closet and the MDF is 100 feet (30 meters). The maximum distance between the two MDFs and the campus core is no more than 150 feet (45 meters). There are eight strands of multi-mode OM3 grade fiber from these two MDF closets to the campus core. Based on this information, which type of design should be used and what is the maximum speeds supported all uplinks for the existing the multi-mode fiber?

A. three-tier and 10 Gbps

B. three-tier and 40 Gbps

C. two-tier and 10 Gbps

D. two-tier and 40 Gbps