Which 802.11 frames can be sent at any supported rate (as opposed to the basic rate)?

A. Broadcast frames

B. Management frames

C. Multicast frames

D. Unicast frames

What is a proper use for an ingress VLAN in an HP MSM VSC?

A. To specify the VLAN on which APs forward traffic from clients connected to the VSC

B. To enable controlled MSM APs to tunnel wireless guest traffic successfully

C. To map traffic from wired guest clients to an access-controlled VSC

D. To specify the VLAN on which the controller forwards traffic from clients connected to the VSC

A network administrator is managing an existing MSM solution and changes the radio settings for a group of MSM APs controlled by an MSM controller. Which action must the network administrator take to apply the settings to the MSM APs?

A. Click the Save button on the Radio configuration page to immediately apply the new configuration

B. Click the Save button on the Radio configuration page and synchronize the MSM APs to the msm controller

C. Click the Save button on the Radio configuration page and then reboot the MSM APs

D. click the Apply Changes button on the VSC Binding page

A network administrator maps a network profile with a VLAN IF 512 to the LAN port of an HP MSM765 zl Mobility Controller. The network administrator configures an IP interface for this profile and intends to contact and manage the controller on this interface. All other settings remain at default.

What is one step that the network administrator must complete before connecting to the controller on its new IP address?

A. Set the IP interface as the authorized egress VLAN in the default VSC.

B. Set the untagged LAN port network interface IP address to none.

C. Select the new IP interface as an active interface in the Controller >> Management > Management tool window.

D. Enable Spanning Tree Protocol (STP) on the interface.

A network administrator installs an HP MSM765 zl controller in slot D of HP 8212 zl switch. The network administrator plans to configure a management IP address on the controller's (untagged) Internet port network.

This address is in the subnet that is associated with VLAN 2 in the corporate LAN. How should the network administrator configure the HP 8212 zl switch?

A. Specify VLAN 2 as the tagged VLAN on interface d1.

B. Specify VLAN 2 as the tagged VLAN on interface d2.

C. Specify VLAN 2 as the untagged VLAN on interface d1.

D. Specify VLAN 2 as the management VLAN and assign VLAN 2 to interface d2.