Passcerty.com » HP » ASE » HP2-Z34

HP2-Z34 Exam Questions & Answers

Exam Code: HP2-Z34

Exam Name: Building HP FlexFabric Data Centers

Updated:

Q&As: 60

At Passcerty.com, we pride ourselves on the comprehensive nature of our HP2-Z34 exam dumps, designed meticulously to encompass all key topics and nuances you might encounter during the real examination. Regular updates are a cornerstone of our service, ensuring that our dedicated users always have their hands on the most recent and relevant Q&A dumps. Behind every meticulously curated question and answer lies the hard work of our seasoned team of experts, who bring years of experience and knowledge into crafting these premium materials. And while we are invested in offering top-notch content, we also believe in empowering our community. As a token of our commitment to your success, we're delighted to offer a substantial portion of our resources for free practice. We invite you to make the most of the following content, and wish you every success in your endeavors.


Download Free HP HP2-Z34 Demo

Experience Passcerty.com exam material in PDF version.
Simply submit your e-mail address below to get started with our PDF real exam demo of your HP HP2-Z34 exam.

Instant download
Latest update demo according to real exam

*Email Address

* Our demo shows only a few questions from your selected exam for evaluating purposes

Free HP HP2-Z34 Dumps

Practice These Free Questions and Answers to Pass the ASE Exam

Questions 1

Refer to the exhibit

An administrator is setting up an MPLS Layer 2 VPN between customer Sites 1 and 2 and is defining the pseudo wire (PW) ID for this purpose. How should the PW IDs and router values be configured?

A. Set the PW ID to a different value on PE-1 and PE-2 The value on each router must match the label advertised by the peer for its loopback address.

B. Set the PW ID to a different value on PE-1 and PE-2 Also use a different value from other PWs on these routers.

C. Set the PW ID to the same value on PE-1 and PE-2. Use a different value from other PWs on these routers.

D. Set the PW ID to the same value on PE-1 and PE-2. The value on each router must match the S-VLAN ID for the associated service instance.

Show Answer
Questions 2

Refer to the exhibit PE-1 receives an IP packet that is destined to 10 1.10 10 and does not have an MPLS header. What does PE-1 do?

A. drops the packet

B. adds an MPLS header without a label and forwards the packet to 10.1.1.1 on VLAN 17

C. adds an MPLS header with label 1150 and forwards the packet to 10.1.1.1 on VLAN 17

D. forwards the packet to 10.1.1.1 on VLAN 17 without an MPLS header

Show Answer
Questions 3

Refer to the exhibit An EVI network is being set up as shown in Exhibit 1. Part of Switch 1's configuration is shown in Exhibit 2 All other switches are configured correctly and can reach each other. The EVI links should carry traffic in VLANs 4 to 20; however, when the administrator tries to ping a VLAN 4 device in DC 2 from DC 1. the ping fails.

What should the administrator do?

A. Change the tunnel source IP address to the Switch 1 router ID.

B. Add tunnel destination IP addresses to the tunnel interface.

C. Either disable the neighbor-discovery server setting or remove the client setting

D. Configure the tunnel interface to extend VLANs 4 to 20 instead of VLAN 100.

Show Answer
Questions 4

What is an appropriate situation for configuring an interface as a silent TRILL access port?

A. The interface connects to another TRILL switch, which has a higher DRB priority than this switch

B. The interface connects to a downstream non-TRILL switch, which is connected to another TRILL switch. The administrator does not want the interface to carry encapsulated TRILL traffic.

C. The interface connects to a downstream non-TRILL switch, which is connected to another TRILL switch The administrator wants the interface to provide a backup path for encapsulated TRILL traffic

D. The interface connects directly to server NICs. and it is a bridge aggregation on an IRF virtual device.

Show Answer
Questions 5

Which statement is correct about defining a Route Distinguisher (RD) for a VPN instance on an HP Comware switch?

A. The RD is only required when the router runs Border Gateway Protocol (BGP) and must match the BGP router ID.

B. The RD is only required when the router runs Border Gateway Protocol (BGP) and must be unique to that VPN instance.

C. The RD is always required and must match the switch global router ID.

D. The RD is always required and must be unique to that VPN instance.

Show Answer

Viewing Page 1 of 3 pages. Download PDF or Software version with 60 questions