Match each characteristic to the connect multicast routing protocol. If both protocols exhibit characteristic, you must select both.

Hot Area:

Hot Area:

A company needs a simple guest access solution. On each HP Provision access layer switch, the network administrator (Web-Auth) to an external Web server. Which guidelines must the administrator follow while setting up the Web server?

A. The Web server must be able to ping IP addresses in the Web-Auth subnet on each switch.

B. The server must have a certificate that is signed by a CA certificate loaded on the access layer switches.

C. The login pages must exactly match template pages provided by HP. with the exception of the logo image.

D. The login pages must use specific names, which are documented in switch manuals.

Refer to the exhibit.

A company has a functional multicast routing solution, which routes multicasts from the data center users in VLAN3 and VLAN4. Users in VLAN 3 and VLAN 4 sometimes register for some of the same multicast. The network administrator wants to prevent duplicate multicasts on the link between the core IRF virtual switch and the access layer IRF virtual switches.

What should the administrator do to accomplish this goal?

A. Enable IGMP snooping on VLAN 3 and VLAN4 (Layer 2) on the core switch and on the access layer switches.

B. Create Layer 3 interfaces for VLAN 3 and VLAN 4 on the access layer switches, and enable IGMP on the interfaces.

C. Enable Multicast VLAN and IGMP snooping on VLAN 3 on the access layer switches, and associate VLAN 4 as a sub-VLAN.

D. Create Layer 3 interfaces for VLAN 3 and VLAN 4 on the access layer switches, and enable PIM on the interfaces.

Refer to the exhibit.

A network administrator is checking the Quality of Service (QoS) settings on an HP ProVision Switch.

This frame arrives on the switch:

Ingress port: A1

No 802.1Q tag

Source IP address = 10.1.2.10

Destination IP address = 10.1.4.4

DSCP = 48

Destination TCP port = 5060

To which priority queue will the switch assign this frame? (Queues are numbered 0-7) B. 1

C. 4

D. 6

Refer to the exhibits. Exhibit 1 Exhibit 2

Exhibit 2 shows the Virtual Router Redundancy Protocol (VRRP) configuration and status for VLAN 3 on switch 1 during normal operation, when both Switch 1 and Switch 2 are up. Switch 1 then experiences a power failure. After a few

minutes, power is restored, and the switch comes back up.

What happens to VRRP operations in VLAN 3?

A. Switch 1 becomes Master two minutes after its VRRP processes up.

B. Switch 2 remains Master Switch 1 receives an error and stops participating in VRRP

C. Switch 2 remains Master, and Switch 1 becomes a Backup router.

D. Switch 1 becomes Master as soon as its VRRP processes come up.