What is the purpose of floating self-IP addresses?

A. to define an address that grants administrative access to either system at any time

B. to define an address that allows either system to initiate communication at any time

C. to define an address that allows network devices to route traffic via a single IP address

D. to define an address that gives network devices greater flexibility in choosing a path to forward traffic

Which parameters are set to the same value when a pair of BIG-IP devices are synchronized?

A. host names

B. system clocks

C. profile definitions

D. VLAN fail-safe settings

E. MAC masquerade addresses

Where is connection mirroring configured?

A. It an option within a TCP profile.

B. It is an optional feature of each pool.

C. It is not configured; it is default behavior.

D. It is an optional feature of each virtual server.

A virtual server is defined per the charts. The last five client connections were to members C, D, A, B, B. Given the conditions shown in the above graphic, if a client with IP address 205.12.45.52 opens a connection to the virtual server, which member will be used for the connection?

A. 172.16.20.1:80

B. 172.16.20.2:80

C. 172.16.20.3:80

D. 172.16.20.4:80

E. 172.16.20.5:80

The ICMP monitor has been assigned to all nodes. In addition, all pools have been assigned custom monitors. If a pool is marked available (green) which situation is sufficient to cause this?

A. All of the pool member nodes are responding to the ICMP monitor as expected.

B. Less than 50% of the pool member nodes responded to the ICMP echo request.

C. All of the members of the pool have had their content updated recently and their responses no longer match the monitor receive rule.

D. Over 25% of the pool members have had their content updated and it no longer matches the receive rule of the custom monitor. The other respond as expected.