Refer to the exhibits.

Exhibit A

Exhibit B

Exhibit C

Exhibit D

Which SAN connectivity solution uses the EMC best practice for port group oversubscription on a Cisco 24-port module?

A. Exhibit 1

B. Exhibit 2

C. Exhibit 3

D. Exhibit 4

You are examining NAR files from a VNX Block system and notice that the I/O has no write burst and overall is very low. The low and high watermarks are currently set at 40/60. What settings would you recommend for the low and high watermarks?

A. 60/80

B. 80/90

C. 60/70

D. 20/40

A customer has an environment consisting of 20 classic LUNs of 150 GB each that hold data from a custom application, and 5 thick LUNs of 500 GB each that are used for a database application. Free disk space on the system amounts to 500 GB.

The customer runs a scan of the classic LUNs each night to check for data corruption. The application must be shut down in order to run the scan. Scans are taking too long to run, and production is affected. The customer asks for a solution to the problem.

What should you propose?

A. Create VNX Snapshots of the LUNs each evening, and run the scan against the Snapshots

B. Clone each of the application LUNs each evening, and run the scan against the Clones

C. Clone each of the application LUNs each morning, and run the scan against the Clones

D. Create SnapView Snapshots of the LUNs each evening, and run the scan against the Snapshots

A customer is running SnapSure and wants their users to be able to perform a file restore from their own workstations.

Which feature in SnapSure would allow this?

A. CVFS

B. VSS

C. VFS

D. AWS

When creating a RAID 6 RAID Group, what is the maximum number of disks that can be incorporated?

A. 16

B. 24

C. 32

D. 40