A technician receives a repurposed PowerEdge server. After racking and cabling the server, the technician attempts to log into the iDRAC but cannot do so. The default account has been disabled.

What method can be used to enable the default login account?

A. Run the racadm recreset command from the host OS.

B. Run the racadm recresetcfg command from the host OS.

C. SSH into the iDRAC and run the racadm racresetcfg command.

D. SSH into the iDRAC and run the racadm racreset command.

A technician needs to troubleshoot a server. The OS had been operational, but an untrained person accessed the System Setup utility on the server and now the OS fails to load. The technician reboots the server, selects F2, accesses the System Setup utility, and selects System BIOS.

What two items should the technician verify in the System BIOS settings before reloading the OS?

A. Boot Settings > Boot Option Settings > Boot Sequence Integrated Devices > OS Watchdog Timer

B. Boot Settings > Boot Mode Boot Settings > Boot Option Settings > Boot Sequence

C. Boot Settings > Boot Mode Integrated Devices > OS Watchdog Timer

D. Boot Settings > Boot Mode Device Settings > Boot Sequence

A technician needs to configure a server to PXE boot a server setup image with the BIOS in UEFI mode. What action is required to enable this function?

A. Navigate to Network Settings, PXE Device1 Settings, and configure IP

B. Boot to Ctrl+S and configure the NIC for PXE Device1

C. From the iDRAC web interface, select Network Settings, and enable PXE Device1 D. Navigate to Boot Options Settings and set PXE Device1 as first option

A technician has the ISO image of an OS that they need to install on a server in a remote location. They are already logged into the iDRAC. How should the technician install the OS?

A. Click Launch under the Virtual Console Preview, Select Next Boot, and choose Virtual CD/DVD/ISO

B. Click Launch under the Virtual Console Preview and then connect to Virtual Media

C. Click Launch under the Virtual Console Preview, reboot the server into F10, and start the Lifecycle Controller OS Deployment wizard

D. Click on Update and Rollback under Quick Launch Tasks

A server has two power supply units (PSUs) in a redundant configuration. One PSU fails. A technician replaces the failed PSU, but the server does not return to redundant power mode.

What is the cause of this issue?

A. Power redundant option is disabled in the System Setup Utility.

B. Server has not been power cycled to bring the new PSU online

C. Both PSUs were not replaced at the same time

D. New PSU has a different wattage than the existing PSU