You are onsite to deploy an EMC Isilon cluster that is already racked and cabled. What serial settings must be used to initially configure this cluster?

A. 9,600 bps, 8 data bits, no parity, 1 stop bit, hardware flow control

B. 38,400 bps, 8 data bits, no parity, 1 stop bit, software flow control

C. 115,200 bps, 8 data bits, no parity, 1 stop bit, hardware flow control

D. 128,000 bps, 8 data bits, no parity, 1 stop bit, software flow control

What is required to perform management operations through the web administration interface?

A. An external IP address reachable over TCP port 8080

B. Direct serial connectivity to any node in the cluster

C. TCP port 23 open between Isilon and a remote management server

D. ConnectEMC services enabled on the cluster

Which feature(s) is supported in NFSv3?

A. Dynamic failover

B. Stateful failover

C. ACLs and ACEs

D. Shares mounted separately

A customer is examining their CELOG events on their OneFS 7.2 cluster and identifies an event indicating one of their node pools is underprotected.

What is the most likely cause of the CELOG event?

A. Additional nodes were added to the cluster

B. One or more of their nodes are offline

C. The OneFS version on the cluster was recently upgraded

D. The Default file pool policy requested protection level was modified

What is the recommended best practice when setting snapshot deletion schedules?

A. Determined by your RTO and RPO SLAs

B. Set to six times the length of the snapshot policy period

C. Set to delete after the next snapshot is taken

D. Set to one year after the snapshot is taken