An engineer is installing 10Gb modules into a pair of MXL switches. Which cable is correct for this installation?

D)

A. Exhibit A

B. Exhibit B

C. Exhibit C

D. Exhibit D

Company servers are in the branch offices located at different geographic locations. All servers are running ESXi hypervisor. The are no network connections between the branch office and central office.

What is the most cost effective way to update firmware in each location?

A. Send a server administrator on site to update firmware using iDRAC/LC

B. Export DUP scripts from Repository Manager to a USB key and ship to each location.

C. Export a bootable ISO from Repository Manager and ship to eachlocation.

D. Use OpenManage Essentials to push updates to each location.

A VRTX server comes with two server modules. The customer requests to assign three PCIe Adapters per each server module. While performing this configuration, the engineer is unable to assign more than two PCIe Adapters per server module.

What is the cause of this issue?

A. The VRTX chassis came with a CMC Express License.

B. The CMC configuration needs to be reset to the factory defaults.

C. The VRTX chassis needs to be updated with the latest firmware.

D. This is a limitation ofVRTX chassis.

An engineer needs to enable automated proactive support from Dell for ProSupport entitled assets discovered in OpenManage Essentials.

What additional software should the engineer install?

A. Dell ProSupport for Servers

B. Dell SupportAssist for Servers

C. Dell Phone Home for OpenManage Essentials

D. Dell SupportAssist for OpenManage Essentials

An engineer has a blade chassis (VRTX) and is having connectivity issues. The chassis has blades in SLOTS 1 and 2. A switch is installed in the chassis.

-

Port channel 1 is for Server 1 interfaces

-

Port channel 2 is for Server 2 interfaces

-Server interfaces are members of VLANs 10, 50, and 100

-

External interfaces are in a port channel

-

External interfaces are configured to pass traffic on VLAN 10, 50, and 100 Configuration info from Server interfaces and port channels: Server Ports: Switchport: enable Administrative Mode: trunk Operational Mode: up Access Mode VLAN: 1 Port Channels 1 and 2: Switchport: enable Administrative Mode: access Operational Mode: up Access Mode VLAN: 1 Servers can NOT communicate with the network outside of the switch. Other systems can NOT

communicate with the servers inside the chassis. The two servers can communicate with each other. What does the engineer need to do to establish server communication?

A. Add untagged VLANs 10, 50, and 100 to port channel 1 and 2

B. Change port channel 1 and 2 to switchport mode trunk

C. Add untagged VLANs 10, 50, and 100 to server ports

D. Change server ports to switchport mode access.